- Cut a rectangle of felt 4" long by 1" wide.
- Fold top over about 3/4" and hot glue lower edge down. Be sure to leave a tube (or sleeve) towards the top so you can feed ribbon through the hole. *Suggestion after I made mine: It would be easier to lay a 4" piece of ribbon or thin piece of felt on the tie before you glue the lower edge down.
- Fold the two sides of the back together, glue the tie together where you glued the lower edge in the step above.
- Fold bottom in half towards the back, measure up about 1/2" or so from the bottom and cut a tip into the bottom of the tie.
- *If you didn't lay your ribbon on the felt before gluing in step 2 above, feed it through the hole with a needle or safety pin.
- Hot glue a little velcro to the ribbon to secure the tie on doll.
Ken says he's ready for the parade now😎
🍀Make something just for fun and have a happy day🍀
I'm Joining:
Creatively Crafty
A Morning Cup Of Joe
Create Bake Make
Handmade Monday
Craftastic Monday
Keep In Touch
Wonderful Wednesday
Creative Muster
I'm Joining:
Creatively Crafty
A Morning Cup Of Joe
Create Bake Make
Handmade Monday
Craftastic Monday
Keep In Touch
Wonderful Wednesday
Creative Muster
This made me smile, will work well with your orange hair headband....I'll have to remember these great ideas!! Too CUTE!
ReplyDeleteKen is ready for the parade!
ReplyDelete